The tarpaulin must be subjected to various tensions during use, such as tension when it is fixed; it must be subjected to additional forces such as wind, rain, and snow during use. Despite these external forces, they are still required to maintain their original shape and not easily deformed, which requires the tarpaulin to have high tensile strength, and there should not be too much difference in tensile strength between warp and weft. Especially the tensile strength of large tents used as inflatable buildings is extremely important. Generally, the base fabric is made of high-strength polyester, vinylon and other long-fiber fabrics. Finished with vinyl chloride resin and chlorosulfonylated polyethylene resin for waterproofing. The strength of the product is mainly determined by the strength of the fiber material and the density of the fabric.
As eaves tents and large tents, it is often used under tension. The fabric elongation should not be too large, and its dimensional stability is determined by the creep characteristics of the material.
Tarpaulin damage is mainly caused by tearing, so tear strength is an important indicator of tarpaulin. The tear strength is related to whether the tarpaulin will be broken due to the action of flying foreign objects or expand around after forming holes for some reason, forming a large structural tear. So, when the tension is high. Both high tensile strength and high tear strength are required for the tarpaulin.
Water resistance is an important characteristic of tarpaulin. After dipping and finishing, vinyl chloride resin is filled in the gaps of the fabric tissue to form a coating film. If the amount of resin adhesion per unit area exceeds a certain level, water resistance is not a problem. If the coating film is thin, the coating film is easy to break when subjected to bending, soft rubbing or surface abrasion, which may cause mud and water to adhere.
Starting from the safety of use, the tarpaulin is required to have
The tarpaulin must be subjected to various tensions during use, such as tension when it is fixed; it must be subjected to additional forces such as wind, rain, and snow during use. Despite these external forces, they are still required to maintain their original shape and not easily deformed, which requires the tarpaulin to have high tensile strength, and there should not be too much difference in tensile strength between warp and weft. Especially the tensile strength of large tents used as inflatable buildings is extremely important. Generally, the base fabric is made of high-strength polyester, vinylon and other long-fiber fabrics. Finished with vinyl chloride resin and chlorosulfonylated polyethylene resin for waterproofing. The strength of the product is mainly determined by the strength of the fiber material and the density of the fabric.
As eaves tents and large tents, it is often used under tension. The fabric elongation should not be too large, and its dimensional stability is determined by the creep characteristics of the material.
Tarpaulin damage is mainly caused by tearing, so tear strength is an important indicator of tarpaulin. The tear strength is related to whether the tarpaulin will be broken due to the action of flying foreign objects or expand around after forming holes for some reason, forming a large structural tear. So, when the tension is high. Both high tensile strength and high tear strength are required for the tarpaulin.
Water resistance is an important characteristic of tarpaulin. After dipping and finishing, vinyl chloride resin is filled in the gaps of the fabric tissue to form a coating film. If the amount of resin adhesion per unit area exceeds a certain level, water resistance is not a problem. If the coating film is thin, the coating film is easy to break when subjected to bending, soft rubbing or surface abrasion, which may cause mud and water to adhere.
Starting from the safety of use, the tarpaulin is required to have better flame retardancy. Flame retardancy can be obtained by selecting flame retardant fiber and flame retardant base cloth. It can also be achieved by adding flame retardant to the coating agent. The amount of flame retardant added has a direct relationship with the flame retardant effect.
Yatai pvc tarpaulin adopt German manufacturing standards, and the main structure is made of high-strength aluminum alloy. The tarpaulin is made of polyester filament as the base cloth, and the surface is attached with PVC film. The tarpaulin is mainly white, and other colors can be customized. Weisbert smart tent has the following characteristics: weatherproof, UV protection, B1 class fire protection, cold resistance, anti-wrinkle top fabric, opaque, weight 850g/m2, fire retardant, in line with German DIN 4102 B1, M2 standard Wind load capacity 80-100Km/h.
Company inventory tents: the span (width) is from 3m to 70m, and the length can be increased infinitely according to 3m/group or 5m/group. The side height ranges from 2.6m to 12.5m. With fire, wind, solid and reliable performance.
The main products are: pointed roof, herringbone roof, spherical, curved, arched, peach-shaped and various special-shaped tents. Our event tents, storage tents, wedding tents, and exhibition tents are widely used in family gatherings, business meetings, exhibitions, large-scale celebrations, warehousing and logistics, disaster relief inspections and other scenarios. There are no pillars in the middle of the tent, and the site is 100% used.
The interior of the tent is equipped with: floor, platform, carpet, curtain, lamp, air conditioner, stage, audio, table, chair, and other equipment. One-stop all-round service to fully meet customer needs.
Fixing method: free method 1: steel brazing (dirt ground is suitable for steel brazing);
Free method 2: Expansion screw (it is applicable to the expansion screw fixing method when the ground is cement floor and can be used for destructive construction, so that the cost can be reduced);
Charging method 3: cement block, yellow sand, water tank pressure (destructive construction cannot be carried out on the ground);
Tent products can be widely used in the exhibition industry: outdoor temporary exhibition halls, indoor/outdoor special sale booths, temporary exhibition halls, VIP lounges, reception centers, news centers, lecture venues, meeting rooms, product tours, new product releases, publicity displays, etc. .
The tent products are made of aluminum alloy structure, which can be spliced freely according to the size of your site. Holding exhibitions in the refined tent can infinitely extend your creative space.
better flame retardancy. Flame retardancy can be obtained by selecting flame retardant fiber and flame retardant base cloth. It can also be achieved by adding flame retardant to the coating agent. The amount of flame retardant added has a direct relationship with the flame retardant effect.
Yatai pvc tarpaulin adopt German manufacturing standards, and the main structure is made of high-strength aluminum alloy. The tarpaulin is made of polyester filament as the base cloth, and the surface is attached with PVC film. The tarpaulin is mainly white, and other colors can be customized. Weisbert smart tent has the following characteristics: weatherproof, UV protection, B1 class fire protection, cold resistance, anti-wrinkle top fabric, opaque, weight 850g/m2, fire retardant, in line with German DIN 4102 B1, M2 standard Wind load capacity 80-100Km/h.
Company inventory tents: the span (width) is from 3m to 70m, and the length can be increased infinitely according to 3m/group or 5m/group. The side height ranges from 2.6m to 12.5m. With fire, wind, solid and reliable performance.
The main products are: pointed roof, herringbone roof, spherical, curved, arched, peach-shaped and various special-shaped tents. Our event tents, storage tents, wedding tents, and exhibition tents are widely used in family gatherings, business meetings, exhibitions, large-scale celebrations, warehousing and logistics, disaster relief inspections and other scenarios. There are no pillars in the middle of the tent, and the site is 100% used.
The interior of the tent is equipped with: floor, platform, carpet, curtain, lamp, air conditioner, stage, audio, table, chair, and other equipment. One-stop all-round service to fully meet customer needs.
Fixing method: free method 1: steel brazing (dirt ground is suitable for steel brazing);
Free method 2: Expansion screw (it is applicable to the expansion screw fixing method when the ground is cement floor and can be used for destructive construction, so that the cost can be reduced);
Charging method 3: cement block, yellow sand, water tank pressure (destructive construction cannot be carried out on the ground);
Tent products can be widely used in the exhibition industry: outdoor temporary exhibition halls, indoor/outdoor special sale booths, temporary exhibition halls, VIP lounges, reception centers, news centers, lecture venues, meeting rooms, product tours, new product releases, publicity displays, etc. .
The tent products are made of aluminum alloy structure, which can be spliced freely according to the size of your site. Holding exhibitions in the refined tent can infinitely extend your creative space.
Privacy settings